DML Strip Ceiling 85L Profille | Steel & Aluminium Ceiling DML Strip Ceiling | Metal and Aluminium Strip and Open Ceiling

DML strip ceiling 85L profiles are reliable, easy to install, and high-quality design. DML manufacture varieties of ceilings that are made from steel materials coated with polyester paint color either in aluzinc finishes or aluminum. Powder coating color is offered upon request. With these enamel baked color coating or powder coated colors, the finishes are guaranteed on the steel ceiling. The coatings allow rust-free, fungus free and long-lasting. Thus strip ceiling will enhance the excellent appearance to all structural buildings.
Strip ceiling is a modern way to panel ceiling. DML strip ceiling 85L profile, a linear pattern ceiling applied on C profile panel. DML strip ceiling is available for both louvers cladding and strip ceiling designs. The steel ceilings are designed uniquely and apply perfectly to the interior and exterior structure of buildings such as restaurant signage, office ceilings, and house cladding.
Metal Ceiling
Aluminium , Zinc Aluminium, Galvanized Steel
• DML85L
• DML85L/B
• DML85L/U
Feature Performance
LightweightLightweight clip-on carrier system
DurableTough and able to withstand pressure, intense heat, tear and last for extended years
Sound insulationNoise-insulating multi-chamber frames are applied to reduce noises
Energy saving/efficientYes
Environmental friendlyMaterials used are reusable and do not harm the environment.
Specification Properties
Panel size effective width85mm
ThicknessAluzinc panel:
0.4mm (gross wt: 4.1 kg/m²)
0.4mm (gross wt: 4.3 kg/m²)
0.4mm (gross wt: 4.6kg /m²)
Aluminium panel :
0.5mm (gross wt: 1.7 kg/m²)
0.5mm (gross wt: 1.8 kg/m²)
0.5mm (gross wt: 1.9kg/m²)
Panel jointMust be at minimum of 100mm overlapped
Panel end holding from mullionDML 85L:
Must not exceed 300mm
Carrier size35mm (W) x 35mm (D) x 4880mm (L)
Galvanized steel carrier thickness0.7mm
Type of suspension G.I. wire hanger14 gauge (by installer)
Suspension thickness G.I bracing0.5mm
Aluzinc L angle edge and corner finished thickness0.4mm
Company Installation Minimum Order Cover area
(Ceiling and Louvre Manufacturer)No0
No Result found.
No Photo & Brochure available
Requested Sample