Dritech’s Super Lastic & Dri-Lastic Dritech

1000+
Dritech’s Super Lastic & Dri-Lastic
Dritech’s Super Lastic & Dri-Lastic waterproofing membranes are suitable to be used in a wide range of application areas, along with other complementary products such as the Dri-Tape & Super Fibre series.
NA
Waterproofing
NA
• Super Lastic S-200
• Super Lastic S-600
• Super Lastic S-800
• Super Lastic S-900
• Dri-Lastic WP-20
• Dri-Tape J-50
• Super Fibre R120 / R225
Feature Performance
Wide range of applicationCan apply from slab, beam, roof, wall to metal.
Low VOCEco-friendly with Low VOC / Non-toxic formulation
Ease to useOne part system, easy to use, lesser error
WaterproofLiquid applied waterproofing membrane, highly elastic, seamless, crack bridging membrane
SIRIM recognizedYes
State of the Art SolutionYes
Cost savingYes
Enhances property valueYes
Specification Properties
ColourBlack, Grey, White or other Colours
Packaging20kg plastic pails / 200kg drums
Storage9 Months from date of production
Storage ConditionDry conditions at temperature between 5-35 Degree Celsius
OriginBitumen
Density~1.0kg/l at +23oC
Service Temperature-5°C to +40°C
Substrate temperature (and Ambient)8-35 Degree Celsius
SubstrateNo standing water/condensation on the substrate
Relative Air HumidityMax. 80%
Dew pointSurface temperature must be +3 Degree Celsius above dew point
Final cure 2-4days (depending on thickness/curing conditions)
Over coating time6-12 hours
Tack free½ to 1 hours at 25oC / 50% RH
Dew point Surface temperature must be +3 Degree Celsius above dew point
Normal expose conditionPriming coat 0.35kg/m2 - (Diluted with 10% water) 1st coat 0.6-0.8 kg/m2 2nd coat 0.6-0.8 kg/m2
Severe expose conditionPrime 0.35kg/m2 (Diluted with 10% water) 1st/2nd/3nd coat 0.6-0.8 kg/m2 Reinforce layer SUPER FIBRE
NA
NA
NA
Company Installation Minimum Order Cover area
No Result found.
No Photo & Brochure available
Available Supplier
0