DRI-GARD CP 750 water repellent Dritech Protective Coatings

100+
DRI-GARD CP 750 water repellent
DRI-GARD CP 750 water-based hydrophobic impregnator is one-part water-repelling impregnator for absorbent cementitious substrates. It penetrates into open pores of the substrates and effectively provides water repellency, while still allowing water vapour diffusion in both directions.
This product can also be used as a colourless protective surface treatment. It may be used on exposed materials such as concrete, cementitious rendering, concrete tiles, fibre cement, brickwork, natural stone, etc. It may be used as a hydrophobic primer under solvent-based or emulsion protective coating.
DRI-GARD CP 750 water-based hydrophobic impregnator is best applied on Absorbent cementitious substrates, Concrete, Cementitious rendering, Concrete tiles, Fibre cement, Brickwork (Clay & lime sand, non-vitrified) and Natural Stone
Protective Coatings
Water base Silane/Siloxane
NA
Feature Performance
Water repellentReduction of capillary water absorption
Stain resistantReduces dirt penetration into the pores. Reduces efflorescence
Thermal insulationYes
Environmental friendlyWater-based and Low VOC/Odor. Reduces chloride ion ingress & movement
DurableHigher durability & resistance compared to conventional silicone-based treatments.
Specification Properties
Density~ 0.80 kg/l (at 20oC)
Flash Point~ 36 – 40 oC
ConsumptionApprox. 0.10 – 0.50 kg/m2 per coat for normally absorbent substrate. In order to ensure durability, a minimum of 2 coats must be applied.
Substrate Temperature5 – 30 oC
Ambient Temperature5 – 30 oC
Substrate Moisture Content< 5%
NA
NA
NA
Company Installation Minimum Order Cover area
(Chemical Supplier and Manufacturer)Yes0Cyberjaya, Johor, Kedah, Kelantan, Kuala Lumpur, Malacca, Negeri Sembilan, Pahang, Penang, Perak, Perlis, Putrajaya, Selangor, Terengganu
No Result found.
No Photo & Brochure available
Available Supplier
Dritech Chemicals Sdn Bhd (Chemical Supplier and Manufacturer)
0