DRI-GARD SW 180 chemical resistant epoxy coating Dritech Protective Coatings

100+
DRI-GARD SW 180 chemical resistant epoxy tar coating is a two-part, High solids, chemical resistant, reaction hardening coal tar epoxy coating, in combination with mineral fillers. DRI-GARD SW 180 can be used in sewage treatment plants, manholes exposed to sewage water, immersed piers, ballast tanks, and so on. It can also be applied as an internal or external coating for permanently immersed or buried structures, and bonds well to concrete and steel surfaces.
DRI-GARD SW 180 chemical resistant epoxy tar coating best applicable in Sewage treatment plants, Manholes, Immersed piers, Steel and concrete silos, Ballast tanks, Marine structures, Steel protection
Protective Coatings
Coal tar epoxy
NA
Feature Performance
VersatileSuitable for concrete and steel surfaces. Suitable as an internal or external coating. Suitable for permanently immersed or buried structures.
Chemical resistantProtects concrete against sulphate attack of wastewater
DurableIncreases durability of concrete and steel
Specification Properties
Density1.2-1.3 kg/L mixed resin
Solid Content85% ± 5% by volume
Temperature ResistanceContinuous: +90oC Non-continuous: +120oC
Chemical ResistanceGood against the immersion, fumes & splash/spillage against acids, alkalies, solvents, salts and water. Not suitable for the immersion in aromatic/ketone solvents and strong oxidizing acids.
Mixing RatioParts A:B = 4:1 parts by volume
Consumption0.3L/m2 per coat (2 coats-3coats) for 500microns
Dry Film ThicknessApprox. 500 micron (wet) / 425 micron (dry)
Potlife6 – 8 Hours (at +23oC)
Intercoat Periods6 – 24 Hours
Final Drying Time24 – 48 Hours
Application Temperature+10 oC min. / +35 oC max.
NA
NA
NA
Company Installation Minimum Order Cover area
(Chemical Supplier and Manufacturer)Yes0Cyberjaya, Johor, Kedah, Kelantan, Kuala Lumpur, Malacca, Negeri Sembilan, Pahang, Penang, Perak, Perlis, Putrajaya, Selangor, Terengganu
No Result found.
No Photo & Brochure available
0