DRI GARD ZN 80 | Galvanized Steel Anti Corrosion Coating Dritech Protective Coatings

100+
DRI GARD ZN 80 is a ready-to-use zinc-rich coating and allows galvanic steel or iron to get protection by standard coating application methods. It is a cold galvanizing compound that effectively prevents the corrosion of steel substrates in the same manner as hot dip galvanizing. When applied to a ferrous surface, the zinc in DRI-GARD ZN-80 sacrifices itself to protect the substrate.
DRI GARD ZN 80 mostly applicable in Steel structures, Reinforcement steel bars, Repair material for galvanized steel that has been damaged mechanically
Protective Coatings
Synthetic polymer based zinc rich coating
NA
Feature Performance
Corrosion resistantProtects steel with galvanized reactions
Fast installationFast drying
Cost savingSingle coat protection
Easy installationYes
Low maintenanceAs a protective primer in multi-coat paint systems
Specification Properties
Temperature Resistance (dry)40°C – 120°C (with peaks up to 150°C)
Consumption-Recommended Thickness: 60 microns (dry film thickness, DFT)
-Theoretical Coverage: 0.28 kg/m2 at 60 microns DFT, 0.55 kg/m2 for 120 microns DFT
-No. of coats: 1 or 2 coats recommended
Drying time (Subjected to environmental conditions)-Touch dry: 15 minutes
-Dry to handle: 1 hour
-Fully cured: 48 hours
Overcoating time-Application by brush: 2 hours after touch dry
-Application by spray gun: 1 hour after touch dry
Thinning-Brush/Roller: 3 – 5%
-Conventional Spray: 10 – 20%
-Airless Spray: 5 – 7%
NA
NA
NA
Company Installation Minimum Order Cover area
(Chemical Supplier and Manufacturer)Yes0Cyberjaya, Johor, Kedah, Kelantan, Kuala Lumpur, Malacca, Negeri Sembilan, Pahang, Penang, Perak, Perlis, Putrajaya, Selangor, Terengganu
No Result found.
No Photo & Brochure available