Spirolite HDPE Corrugated Subduct Pipe Spirolite HDPE Pipe and Tank

1000+
Spirolite HDPE Corrugated Subduct Pipe is known for its application as a conduit for soil nailing. Soil nailing is a reinforcement process for soil slopes, excavations or retaining walls by insertion of relatively slender elements normally steel reinforcing bars. The bars are usually installed with SPI Single Wall Corrugated PE pipe into a pre-drilled hole and then grouted into place. Quality assurance is also important and we usually conduct an in-process quality inspection and also carry out tests on melt flow index and oxidation induction time. Spirolite HDPE Corrugated Subduct Pipe consists of three main types which are SPI HDPE Corrugated Subduct, Spirolite HDPE Double Wall Corrugated Pipe and Spirolite Ribflo Single Wall Corrugated Subsoil Drainage Pipe AS2439.
Spirolite SPI HDPE Corrugated Subduct is most suitable to be used as Telecommunication fibre-optic sub-duct and soil nailing. Spirolite HDPE Double Wall Corrugated Pipe is suitable for underground cable ducting systems, telecommunication cable conduit, subsoil drainage pipe for landscaping and fields, sewerage pipe or culverts. Spirolite Ribflo Single Wall Corrugated subsoil drainage pipe is suitable to be used for highway, road, golf courses, stadiums, playing fields subsoil drainage and other similar projects such as agriculture lands & constructions sites, Swamps & Building foundations, retaining walls and help release gas in prawn farming using PE sheet lining.
Pipe
HDPE
• SPI Pipe 32 mm
• SPI Pipe 40 mm
• SPI Pipe 50 mm
• Ribflo Pipe 100 mm
• Ribflo Pipe 175 mm
• Double Wall Pipe 100 mm (6m)
• Double Wall Pipe 100 mm (12m)
• Double Wall Pipe 100 mm (30m)
• Double Wall Pipe 100 mm (6m)
• Double Wall Pipe 100 mm (12m)
Feature Performance
Corrosion resistantYes
High flexibilityEven and efficient drainage through the uniform slot pattern
Cost savingYes
LightweightYes
Easy installationLong lengths of coils enable high-speed installation
Specification Properties
SPI Pipe TypeNominal Diameter: 32, 40, 50 mm
Internal Diameter: 26, 33, 43 mm
Standard Length: 250 m/coil
Double Wall Pipe TypeNominal Diameter: 100, 150, 200 mm
Internal Diameter: 117, 174, 243 mm
Standard Length: 6m, 12m, 30m/coil, 50m/coil
Ribflo Pipe TypeNominal Diameter: 175, 100 mm
Internal Diameter: 150, 85 mm
No of Slotted Rows: 3, 6
Slot Area Per Meter of Pipe: >1500 mm²
Length of Pipe Coil: 50, 100 m
HDPE Density g/cm³0.94 - 0.96
Tensile Strength MPa18-25
Elongation at break %>300
Shore Hardness58 - 65
Flexural Modulus MPa>800
NA
NA
NA
Company Installation Minimum Order Cover area
(HDPE Manufacturer )No0
(Supplier and Trading House)No0
No Result found.
No Photo & Brochure available