Aquaflex KS 988A II | Acrylic Polymer Cementitious Coating Keshun Waterproof Technology CKS
Aquaflex KS 988A Type II is a 2 part high polymer flexible cementitious waterproofing coating. It consists of selected Portland cement, polymer latex, proprietary additives. When applied to concrete, it provides an excellent barrier that is impervious to water. It is non-toxic, low in VOC, high flexibility, good adhesion, resists hydrostatic pressure and environmentally friendly. It can easily apply with brush, broom or roller. It is suitable to be used on washroom and underground constructions.
Its application is recommended for toilets, balconies, planter boxes, AHU & pump room, reinforced concrete gutters, reinforced concrete water tanks, swimming pools & fountains, retaining wall, etc.
Protective Coatings
Cement, Polyacrylate Emulsion
NA
| Feature | Performance |
|---|---|
| Waterproof | High bonding strength, it can be bonded firmly with many types of mortar substrate |
| Weather resistant | It can be applied on the outdoor roof without special protective layer (normal protective layer is needed) |
| Environmental friendly | Non-toxic, harmless and safe performance |
| Easy installation | Can be applied on the wet and dry substrate directly. Can be applied on vertical, slope and top surface directly, no flow, easy to use. |
| Specification | Properties |
|---|---|
| Solid content | ≥70%, 105°C, 3hr |
| Tensile strength MPa | ≥1.8 |
| Elongation at break | ≥80 |
| Impermeability | 0.3 MPa, 30min, impermeable |
| Adhesive strength | ≥0.7 |
| Anti-permeability (negative side of mortar) | ≥0.6 |
| Tension strength MPa ASTM D412 modified | 1.1 |
| Elongation at break ASTM D412 modified | 120% |
| Pull of strength with concrete N/mm ASTM D4541 | 0.89 |
NA
NA
NA
| Company | Installation | Minimum Order | Cover area |
|---|---|---|---|
| No Result found. | |||
No Photo & Brochure available