Aquatorch APP | Plastomer Bitumen Membrane Keshun Waterproof Technology CKS
Aquatorch APP is a plastomer modified bitumen waterproof membrane. It is made by bitumen added styrene, butadiene, styrene, TPE as modified materials. The middle layer is placed with polyester fabric for re-enforcement and covered with the modified bitumen layer. It performs very well in cold temperature and exceptionally well in hot temperature. It also has good weather resistance, corrosion resistance, and high workability.
Aquatorch APP is suitable for industrial, residential, basement, tunnel, underground pipeline, water grid system and other waterproofing projects.
Waterproofing Membrane
Polyester, Modified Bitumen
• Type-I-PY
• Type-I-G
• Type-II-PY
• Type-II-G
• Type-II-PYG
• Customize
| Feature | Performance |
|---|---|
| Weather resistant | Yes |
| Corrosion resistant | Yes |
| Easy installation | good construction performance and good workability |
| Waterproof | Yes |
| Specification | Properties |
|---|---|
| Tensile Strength Transverse | 1150±100N 1121N |
| Tensile Strength Longitudinal | 1300±100N |
| Tensile Strain at Break Transverse | 40±5% |
| Tensile Strain at Break Longitudinal | 35±5% |
| Resistance to static loading | 20kg, no leakage |
| Tear Resistance Transverse | 290±30N |
| Tear Resistance Longitudinal | 270±30N |
| Flexibility at low temperature | -7°C, no crack |
| Water tightness | No water penetration through the upper filter paper |
| Soluble matter content (g/m²) | Thickness 3mm : 2100 Thickness 4mm : 2900 Thickness 5mm : 3500 Test phenomenon : Type-I-G and TYPE-II-G non-ignitable |
| Heat Resistance | Type-I : 110°C, ≤2 mm, no flowing, no dripping Type-II : 130°C, ≤2 mm, no flowing, no dripping |
| Low temperature flexibility | Type-I : -7°C, no crack Type-II : -15°C, no crack |
| Water tightness (30min/MPa) | Type-I-PY : 0.3 Type-I-G : 0.2 Type-II : 0.3 |
| Maximum tension peak (N/50mm) | Type-I-PY : 500, no crack or seperating Type-I-G : 350, no crack or seperating Type-II-PY : 800, no crack or seperating Type-II-G : 500, no crack or seperating Type-II-PYG : 900, no crack or seperating |
| Second tension peak (N/50mm) | Type-II-PYG : 800, no crack or separating |
| Maximum elongation peak rate | Type-I-PY : 25 Type-II-PY : 40 |
| Maximum second peak rate | Type-II-PYG : 15 |
| Supply | 1m x 10m (10m²/roll) |
NA
NA
NA
| Company | Installation | Minimum Order | Cover area |
|---|---|---|---|
| No Result found. | |||
No Photo & Brochure available