Aquatorch SBS | Elastomer Bitumen Membrane Keshun Waterproof Technology CKS
Aquatorch SBS is an elastomeric modified Bitumen waterproof membrane with the based material of bitumen, styrene, butadiene, styrene, and TPE as an adhesive enhancer. The central part is added polyester fiber to act as the reinforcing layer and outer layer is cover with a modified bitumen layer. It performance stay excellent even under low temperature which very suitable for the cold climate or low-temperature area application. It also has good weather resistance, tensile property, high elongation, wear resistance and excellent workability.
Aquatorch SBS is suitable to be used for industrial and civil building, basement, tunnel, underground pipeline, water grid system and other moisture barrier and waterproof project.
Waterproofing Membrane
SBS, TPE
• Type-I-PY
• Type-I-G
• Type-II-PY
• Type-II-G
• Type-II-PYG
• Customize
| Feature | Performance |
|---|---|
| Weather resistant | suitable even on cold area application |
| Wear and Tear resistant | high tensile strength and high elongation |
| Easy installation | excellent workability |
| Waterproof | high bonding strength using the torch on. |
| Specification | Properties |
|---|---|
| Resistance to static loading | 20kg, no leakage |
| Tearing resistance | (CD) 280±50N |
| Shear Strength | 900±100N/50mm |
| Maximum Tensile Force | (CD)11000±150N |
| Elongation at break | ≥40% |
| Water tightness | No water penetration through to the upper filter paper |
| Flexibility at low temperature | -20°C, no crack |
| Soluble matter content (g/m²) | Thickness 3mm : 2100 Thickness 4mm : 2900 Thickness 5mm : 3500 Test phenomenon : Type-I-G and TYPE-II-G non-ignitable |
| Heat Resistance | Type-I : 90°C, ≤2 mm, no flowing, no dripping Type-II : 105°C, ≤2 mm, no flowing, no dripping |
| Low temperature flexibility | Type-I : -20°C, no crack Type-II : -25°C, no crack |
| Water tightness (30min/MPa) | Type-I-PY : 0.3 Type-I-G : 0.2 Type-II : 0.3 |
| Maximum tension peak (N/50mm) | Type-I-PY : 500, no crack or seperating Type-I-G : 350, no crack or seperating Type-II-PY : 800, no crack or seperating Type-II-G : 500, no crack or seperating Type-II-PYG : 900, no crack or seperating |
| Second tension peak (N/50mm) | Type-II-PYG : 800, no crack or seperating |
| Maximum elongation peak rate | Type-I-PY : 30 Type-II-PY : 30 |
| Maximum second peak rate | Type-II-PYG : 15 |
| Supply | 1m x 10m (10m²/roll) |
NA
NA
NA
| Company | Installation | Minimum Order | Cover area |
|---|---|---|---|
| No Result found. | |||
No Photo & Brochure available