Sanosil 010 Mold Removal Agent SICC Climate Active Paint

1000+
Sanosil S010 is a chlorine-free disinfectant and well suited for mold remediation. The impact is based on the two components hydrogen peroxide and silver. These two components, apart from oxygen, do not release any constituents into the ambient air which may have a toxic effect. For this reason, the otherwise feared side effects caused by the fungicidal agents passing into the indoor air are not present with this product.

Sanosil 003 & 010 deactivate mold and the associated allergens, both on the wall (and ceiling) as from the air. So far there are no known micro-organisms which are not addressed by Sanosil 003 & 010. Because of the good material tolerance building parts are not adversely affected.

After applying Sanosil 003 & 010 are completely harmless to the human organism. The products therefore can be applied in all living areas, also in the kitchen and children's room, without any problems. The spaces are immediately employable after treatment.

Sanosil 003 & 010 have a high disinfecting potential and are not toxic, they break down itself after processing into the original content substances which are present in the water. Contaminated carpets and other materials may be removed with the garbage after treatment.

To protect itself from an elevated tracks in the application of Sanosil 003 & 010 personal protection measures are necessary, such as overall and mouth mask.
Sanosil 010 is possible to be applied in all rooms. Apply Sanosil S010 is applied to visible mould affected surfaces to destroy mould immediately. Sanosil S010 can be applied by brushing or spraying method. To avoid dust of spores and formation of aerosols when spraying low pressure should be used. Depending on the degree of contamination with mould, surfaces must be treated with Sanosil S010 again after the removal of wall coverings.
It is recommended to test compatibility on a non-visible spot, especially for oiled or stained wooden or natural stone surfaces, window frames and white wall paint (titanium dioxide pigments).
chemical
Mold Removal Agent
• 1-liter bottle (1 carton containing 6 bootles)
Feature Performance
Environmental friendlyEnvironmentally friendly and completely free of residues, harmless to health, no danger according to 89/542/EWG
Anti fungalDeactivates long-term all known fungi and their allergens
Specification Properties
Ingredients/ biocidal substances7,84 g/ 100 g hydrogen peroxide, <0,1 g/ 100 g silver, water
Product group / GIS-codeGD10
reaction time30 minutes
pH-Wert3 DIN 19266
MAK valuelong-term value: 0.71 mg / m³, 0.5 ml / m³
Consumption 100 ml/m²
NA
NA
NA
Company Installation Minimum Order Cover area
(Paint Supplier)Yes0Cyberjaya, Johor, Kedah, Kelantan, Kuala Lumpur, Malacca, Negeri Sembilan, Pahang, Penang, Perak, Perlis, Putrajaya, Selangor, Terengganu
No Result found.
No Photo & Brochure available
0