Builtory Supplier Products

ThermoPlus is an interior thermal insulation ceramic coating that is commonly used for indoor application. In hot days most rooms heat up strongly by intensive sunbeams. That influences the concentration, breathing, and a good night's sleep. In cold days, on the other hand, many people, despite increased heating, have the typical cozy feeling: a hot head and cold feet. The interior thermal insulation ceramic coating ThermoPlus from our ClimateActivePaint® product range provides a pleasant interior climate on every day of the year – regardless of the weather outside. The surface-active interior finish contains tiny small ceramic bubbles (Microspheres) and this creates a thermal ceramic membrane after application. During the hot days the membrane takes the excess moisture from the air, stores it and compensates the drier room air at a later stage with this moisture (Entropy principle). This results in evaporation coolness which both cools the wall surfaces, as well as lowers the high room temperatures. In winter when there’s low humidity the thermal ceramic coating takes heat energy and divides this evenly in its membrane without passing it to the wall behind it (SF-technology *). The increased surface temperature now provides a reflection of energy in the short-wave infrared range (IR-reflection). Convection currents and thermal bridges are minimized and avoid dust movement and the formation of mold. As a result – even for people with an allergy or asthma – a pleasant indoor climate is created. Throughout the year, the coating ensures, due to its physical properties, a relative humidity of app. 55%. In general, this is considered as most pleasant. The coating contains no semi-volatile organic compounds such as plasticizers, organic solvents or isothiazolinones. During or after processing, no harmful health or allergy irritant particles or fumes are released. ThermoPlus is used for surface preparation such as Raw plaster surfaces, replastering spots: clean, flute and prime with ClimateActive FixPlus; Concrete- und Fiber-cement: clean and in particular remove rests of mold release agents and prime with ClimateActive FixPlus; Wood: Prime with NaturePrimer; Synthetics: analyze the ability of adhesion; Metals: depending on metal and strain, prime with ClimateActive RustPrimer or ClimateActive ZincPrimer; Non-workable previous coating: depending on the coating, remove by washing, acid cleaning; Adhesion-interfering surfaces: wash, buck, grind

Sanosil 003 & 010 deactivate mold and the associated allergens, both on the wall (and ceiling) as from the air. So far there are no known micro-organisms which are not addressed by Sanosil 003 & 010. Because of the good material tolerance building parts are not adversely affected. After applying Sanosil 003 & 010 are completely harmless to the human organism. The products therefore can be applied in all living areas, also in the kitchen and children's room, without any problems. The spaces are immediately employable after treatment. Sanosil 003 & 010 have a high disinfecting potential and are not toxic, they break down itself after processing into the original content substances which are present in the water. Contaminated carpets and other materials may be removed with the garbage after treatment. To protect itself from an elevated tracks in the application of Sanosil 003 & 010 personal protection measures are necessary, such as overall and mouth mask.

Sanosil S010 is a chlorine-free disinfectant and well suited for mold remediation. The impact is based on the two components hydrogen peroxide and silver. These two components, apart from oxygen, do not release any constituents into the ambient air which may have a toxic effect. For this reason, the otherwise feared side effects caused by the fungicidal agents passing into the indoor air are not present with this product. Sanosil 003 & 010 deactivate mold and the associated allergens, both on the wall (and ceiling) as from the air. So far there are no known micro-organisms which are not addressed by Sanosil 003 & 010. Because of the good material tolerance building parts are not adversely affected. After applying Sanosil 003 & 010 are completely harmless to the human organism. The products therefore can be applied in all living areas, also in the kitchen and children's room, without any problems. The spaces are immediately employable after treatment. Sanosil 003 & 010 have a high disinfecting potential and are not toxic, they break down itself after processing into the original content substances which are present in the water. Contaminated carpets and other materials may be removed with the garbage after treatment. To protect itself from an elevated tracks in the application of Sanosil 003 & 010 personal protection measures are necessary, such as overall and mouth mask.

FixPlus is a prime concentrate for use on mineral surfaces to regulate their absorbency. It strengthens all substrates according to DIN 18500, when the adhesion capacity is not sufficient and it regulates the absorption capacity. ClimateActivePaint FixPlus has a very good intrusion in the substrate, dries quickly, is vapor-open, solvent-free and offers a high firmness.