Builtory Supplier Products
ExcelSports Acrylic Hardcourt Surfacing system is a flooring system that uses Acrylic Concrete sealer applied straight onto a concrete base. This acrylic coat is a high performance and long-lasting system that suitable to be used for outdoor and indoor application such as tennis, basketball, badminton, sepak takraw, futsal, netball, volleyball, multipurpose court, Skate Area / Skate ring, etc. This Acrylic Concrete System was invented after lengthy formulation research, achieving the highest quality possible through the use of 100% resist reinforced powder for in-depth pigmentation to produce an excellent surface coating concrete with extremely hard-wearing and durable.
Aquaflex KS 988A Type II is a 2 part high polymer flexible cementitious waterproofing coating. It consists of selected Portland cement, polymer latex, proprietary additives. When applied to concrete, it provides an excellent barrier that is impervious to water. It is non-toxic, low in VOC, high flexibility, good adhesion, resists hydrostatic pressure and environmentally friendly. It can easily apply with brush, broom or roller. It is suitable to be used on washroom and underground constructions.
Aquaflex KS-901B is an Acrylic polymer cementitious waterproof latex and is also commonly know as Acrylic Polymer Cementitious Coating APCC. It is composed of superior polymer waterproof latex for building and various auxiliaries. It is required to mix with cement before applying on the base surface. After successfully apply the coating the surface will have excellent elasticity, adhesion, rupture strength, impermeability, crack resistance, weather resistance and chemical resistance. It is also an environmentally friendly product due to low in VOC and pollution. It can be found to be used on project roofs, underground, kitchen, and bathrooms.
Rhinoz Stucco Flex is 100% acrylic based, used as a decorative textured coating with an unlimited unique finish as per your design. It is flexible and cover cracks well, suitable for wall and ceiling for exterior and interior application. It is applied easily using a hopper gun, trowel, and paint roller. It contains active biocides to resist the growth of mold and mildew, ensures long durability and weather-resistant properties. It can be used over a variety of common substrate materials, both new and old surfaces such as concrete, fiber cement, gypsum board, etc.
Stucco Flex Plus (STUCCO-FLEX+) is a flexible acrylic-based wall finish coat which enables flexible & elastic wall/ceiling finishing acrylic stucco. Specifically, design to replace conventional skim coats. Water-resistant, alkali resistant, covers and conceals cracks. It can be used as a system or on its own to replace conventional skim coats.
Dritech Super Primer F1 is a one-component, specifically design acrylic-based primer. Multi-functional primer / water-resistant sealer / key coat to enhance bonding between various substrates such as plaster, render, spray tiles, brickwork, concrete and etc.
Dri-Floor AC 288 is an acrylic floor coating that is one-component, premium-grade waterborne pure acrylic sports surface coating. It is formulated to resist fading and withstand harsh tropical weathering and ultraviolet rays.
Dritech Acrylic Flooring Dri-Floor AC 288 Plus is a one-component, premium grade waterborne pure acrylic sports surface coating. It is formulated to resist fading and withstand harsh tropical weathering and ultraviolet rays. Dritech Acrylic Flooring Dri-Floor AC 288 Plus provides a consistent surface and texture, reducing sports injuries & enhances the sports experiences.
Dri-Lastic WP-20 is a high-performance rubberized acrylic modified waterproofing compound. It is low in VOC and ready-to-use to avoid site application and mixing errors that are commonly faced by 2 component waterproofing products. It has a faster curing time compared to cementitious waterproofing mortars, allowing fast application and early completion of projects.
SmartPave HP is a two-component pre-packed high-performance acrylic polymer modified cement based mortar designed for all types of resurfacing, patching and repairing of the concrete surface. Commonly known as Acrylic Polymer Cementitious Coating APCC. Part A is a blend of special cement, specially graded fillers, and chemical additives. Part B is a polymer emulsion of the latest latex technology. Old worn out concrete pavements resurfaced with a thin layer of SmartPave HP exhibits exceptional durability and good water resistance. Apply primer before applying cement coating. SmartPave HP finished surface is normally slightly textured. A much smoother finish for SmartPave HP is possible as well.