Builtory Supplier Products

SSM Engineered Mesh is a customized fabricated mesh such as Bar Mesh, Twin Wire Mesh, Staggered Mesh, Bar Mat, Customized Pitch Mesh and Special Mesh are designed to assist end-users in several key ways. It expedites construction processes and accommodates reinforced concrete structures that require large-diameter steel reinforcement, which conventional steel fabric cannot provide. Additionally, it optimizes steel reinforcement consumption, allowing for more efficient use of materials. This solution enables end-users to accurately track steel fabric utilization, enhancing project management. Southern Steel Mesh also offers a variety of mesh bending services with great precision, performed in our plant. This means the mesh can be installed instantly on-site, eliminating the need for manual bending, thus speeding up overall progress. Bending options for mesh include single bend, double bend, three-sided bend, four-sided bend, single crank, double crank, U-bend, and customizable bends, with the ability to bend up to 6 meters along the bending line at any specified angle.

The Rigid Steel Conduit MS IEC 61386-21: 2010 series & BS 4568 : PART 1 : 1970 Threaded Conduit Heavy Gauge incorporates the specification on rigid steel conduits used in cable management. These high-strength conduits or pipes are made of steel with the most excellent protection of electrical cables in different environments.

Threaded Conduit Heavy Gauge Class B or BS31 Conduit Threaded-Heavy-Duty and threaded with standardized thread; sections securely connect to offer optimum protection for electrical installations.

Electrical Conduit Pipe, threadless conduit, or plain conduit is a smooth cylindrical tube used to protect electrical wiring from penetration. It has no threads and is made from steel or other non-metallic materials.

Intermediate Metal Conduit IMC Smartube has a thicker and heavier steel raceway than EMT. It provides improved protection in various environments and electrical wiring in more severe conditions. IMC is also galvanized for corrosion protection in various lengths and trade sizes.

Electrical metallic tubing (EMT) is a lightweight, thin wall steel raceway of the circular cross-section. It is designed to protect as well as route electrical wiring in a wide array of settings. EMT does not have any threading and is usually provided in 10- and 20-foot nominal lengths. The exterior surface is galvanized for corrosion resistance, while an organic coating lines the interior for rust prevention.

Aluminum oxidises quickly, and also the layer of corundom that forms as a result prevents any corrosion from occurring from air, water, and chemicals. This protecting layer is clear, colourless, and stain-resistant. Anodizing makes it straightforward to color metallic element, and it keeps paint quite well. totally different ways are accustomed end metallic element. Compared to copper, metallic element transmits electricity additional with efficiency. atomic number 13 is totally useful and retains all of its original properties. Of all the metals, metallic element has the best strength to weight magnitude relation. atomic number 13 may be a nice material possibility for uses wherever magnetism should be avoided. Disadvantages are as per following, to weld metallic element, bound procedures area unit required. To be additional precise, the corundom coating that develops on that is abrasive to tooling. it's costlier than steel. CST's innovative design concepts and choice of aluminum as the material of choice continue to solve many unique project design challenges, bring the latest in aerospace technology to the building and construction industry, and provide lifetime cost savings and long-term provides a consistent structural integrity guarantee. The main advantages of using aluminum over steel in various aspects of the building and construction industry are: Aluminum is inherently resistant to most normal atmospheric environments, does not rust or suffer from corrosion problems like steel, and heals itself when scratched. Steel, by comparison, requires a continuous organic or sacrificial inorganic coating to prevent rust and corrosion. When the coating of a steel element fails, the area corrodes rapidly, undercutting the coating and further corroding. Severe rust may require repair to prevent localized or catastrophic structural failure. For the ultimate in cost savings, CST can offer products with a "Bright Milled" finish if the aesthetics of raw aluminum meet your project's needs. Aluminum can also be painted (Kynar) or chemically treated (anodized) for highly corrosive environments, if desired. Lightweight construction of high-strength aluminum alloy reduces overall weight compared to ferrous metals. Combined with the pre-engineered component nature of CST's system, most designs can be shipped using regular freight methods at a lower cost than standard freight. High-strength aluminum alloys are lighter, making them quicker and cheaper to install. The components weigh significantly less than comparable steel members, reducing the manpower and machine requirements to move the parts and assemble and lift the structure. Alternatively, you can lift larger frame sections (or use a longer boom) or use unusual lifting and assembly methods. Aluminum allows you to design your own structural and architectural profiles (extruded profiles) to meet your unique project requirements. Specific performance characteristics of a design can be easily achieved and large projects can be “fine-tuned” to reduce overall costs and absorb the initial cost of new extrusion dies.

Aluminium composite panel is popularly referred to as ACP. it's made up of aluminium composite material(ACM), which contains two thinly coated aluminium sheets. Being comprised of two distinct materials that's metals and non-metal, as aluminium may be a metal and polyethylene plastic is a nonmetal, it overcomes the restrictions and the drawbacks of the original material.

United Gabion is a non-rigid structure constructed of double twisted hexagonal mesh cages filled with rocks to serve as retaining structures or surface protection against erosion. United Gabion allows free passage of water thus eliminates the buildup of hydrostatic pressure behind retaining structures. Normally used at bottom of a slope to increase toe weight or as retaining structure.

Anti-Climb Fencing is a security product that maintains a guarded display of visual screening balancing the need to delay and deter an attack. It combines a mesh that discourages cutting and climbing with a framework that can support a total security platform. Our product is the very tight construction of its anti-scale and anti-cutting welded wire mesh. It’s very difficult to get hand/footholds on this fence and the cutting implements required to sever its welded heavy steel wire just can’t fit into the minimal spaces of the mesh.

Welded steel pipe is a tubular product made of flat plates, known as skelp, which are shaped, bent and prepared for welding.

A seamless steel pipe is extruded from a billet, while a welded pipe is produced from a roll-formed and welded to produce a tube; because a seamless steel tube offers a greater range of safety measures, it is more expensive than a welded tube

DML TX Square Tile Ceiling is a simple square shape ceiling that is very durable, extremely reliable and easy to install. The design is simple and neat which allows applying in all kinds of structural and architectural buildings. The square tiles are made from aluminium that enhances the ceiling properties from dynamic temperature. The aluminium ceiling has standard powder coating finishes as a protection from dust, rust, and scratches. Non-perforated or perforated panels are applied to reduce noises. This square tile lays on the ceiling T. DML aluminium square tile ceiling enhances the excellent appearance to all structural buildings.

DML 150RS Round Screen is an open ceiling that is linear in patterns. The ceiling creates room for plenum space. This gives simple access to the plenum for additional installation services in the future. DML ceiling has durability property that comes from aluminium material, which allows the ceiling to withstand dynamic weather. The aluminium ceiling applies to the J shape profile panel with the lightweight component system to enhance the function of the overall system. Single multi-carrier is used to accommodate the width of the different panels. The aluminium ceiling is dust-free and rust-free due to the plain polyester finishes or powder coating treatment. Plain finishes or perforated panels are applied as an additional aesthetic purpose that will enlighten the design.

DML H Type Open Cell Ceiling is an open ceiling that is square in patterns. The ceiling applies on square cell profile. The ceiling creates room for plenum space that gives simple access to the plenum for additional installation services in the future. DML ceiling is durable to withstand dynamic weather as the ceiling is made of aluminium. The lightweight component system is applied to improve the efficiency of the system. The aluminium ceiling is dust-free and rust-free due to the coating treatment. Standard powder coating is applied based on your preference, as an additional aesthetic purpose that will enlighten the design.

DML190V is a newly designed ceiling offer by DML. The design is the modification of traditional ceiling pattern combines with new elegant style to create an excellent illusion on the ceiling. DML 190V is made of aluminium. The open ceiling concept is applied to create rooms for plenum space that eases the additional installation services in the future. This aluminium ceiling applies to the V shape profile panel with the lightweight component system to enhance the performance of the system. Powder-coated finishes allow the ceiling to be protected from dust, rust, and scratches. The finishing also functions as an additional aesthetic purpose that will enlighten the design.

DML185W Baffle Ceiling is a newly designed ceiling offer by DML. The design is the modification of baffle ceiling combines with new wave-like style to create an excellent illusion on the ceiling. DML 185W composed of aluminium. DML 185W Baffle Ceiling is an open ceiling that creates rooms for plenum space for future additional installation services. This aluminium wave-like ceiling applies on W shape profile panel with the lightweight component system to enhance the performance of the system and aesthetic of the buildings.

DML 235D Baffle Ceiling is a new design offer by DML. The design is formed by multiple semi-round shapes that look like balloons floating on the ceiling. The baffle ceiling applies on semi-round shape panel profile. The colourings of the ceiling finished by powder coating that comes with a variety of clours. DML Baffle Ceiling 235D is made of aluminium that makes the ceiling durable and able to withstand dynamic weather even at outdoors.

DML Strip Ceiling U Profiles are high-quality and reliable design. DML manufacture U profile ceilings that are made from aluminium and galvanized steel finishes. DML Strip Ceiling U Profile polyester coating colour is based on the colour chart. Plain finishes and perforated panel are used to acoustically treat the steel ceiling. The coating allows rust-free, fungus free and long-lasting. A single carrier is applied on this U profile steel ceiling to accommodate four different sizes of the panel width. Strip ceiling will enhance the excellent appearance to all structural buildings.

DML Baffle ceiling is strip ceiling that optimized in all shape and dimension that is distinct in design. Similar to Baffle ceiling, however with a different U profile panel shape. U shaped baffle ceiling is easy to install and offer simple access to plenum space. DML steel ceilings are made from Galvanized finishes and aluminum. Plain polyester finishes or powder was applied on the ceiling surface to protect from scratches.

DML Baffle ceiling is an open ceiling that optimized in all dimension and shape that is distinct in design. The baffle ceiling is easy to install and offer simple access to plenum space. DML baffle ceilings are made from galvanized finishes and aluminum. Plain polyester finishes or powder act as a layer of protection to protect the ceiling surface from scratches. Furthermore, DML Baffle Ceiling contains box shape profile panel.

DML Strip Ceiling S profile is a linear pattern ceiling that comes with a super flush joint. This ceiling is relevant to box shape profile panel, that suits various project requirements. DML strip ceiling s profile is made from Galvanize finishes and aluminium which allows the ceiling to withstand dynamic weather. Single multi-carrier is applied to accommodate different panel width. The ceiling is able to deflect and blend stress of wind velocity at 35m/s 126km/hr.DML steel and aluminium ceiling are optimized in all dimension and shape. The strip ceiling is easy to install and offer simple access to plenum space.

DML Strip Ceiling G profile is strip ceiling with recess groove joints on box shape profile panel. The joints provide a typical installation that allows the ceiling to be stable. Plain finishes or perforated panels are applied for acoustic treatment. DML uses single multi-carrier to accommodate different panel width. The ceiling is able to deflect and blend stress of wind velocity at 35m/s 126km/hr. The products are made from Galvanized finishes and aluminium. The surface is protected by DML polyester from scratches, dust, and rust. Therefore, the DML strip ceiling G profile is suitable for various requirements.

BRC Welded Wire Mesh is the steel fabric that usually used for reinforces concrete. it is usually made from low carbon steel(extra flexibility) nad welded together using steel string in the form of a grid. In order, the wire mesh to produce faster, lesser laborer and precise dimensional control, machines are being used. It is usually supplied in a panel or in roll form for easy transport and bulk supply.

KST Galvanized Steel Wire Coil and Barbed Wire is a long string that made from galvanized steel. It is usually supplied in coil form for easy transport and bulk supply. Its flexibility allows it to be highly customizable to produce many different products such as cage, fence, platform, barrier, wire mesh, grating, ceiling hanger, machine air filter protector, clothes hanger, etc. It is produced in different grade and thickness for different usage and application. A PVC coated wire will have extra protection in terms of weather resistance and corrosion resistance. PVC coated is come with 3 colors of choices such as green, blue and orange. The barbed wire is similar to the wire but with an extra twisted sharp edge that focuses more on prohibiting entry and increases of security & obstacles such as livestock fence, garden, border fencing, military training, warehouse border, residential houses, etc. Galvanized Razor is another higher grade of barbed wire with a sharp blade and is also known as Concertina Barbed Wire.

Chain Link Fence is a fence that usually uses galvanized or coated steel wire to form a diamond pattern fence. Chain link fence is a very common fencing system for many households since its relatively low cost and the diamond spacing allow sunlight from both sides of the fence. It is usually supplied in roll form for bulk and optimize supply. It is easy to install and have good weather resistant that can last for a very long time. KST provide PVC coated with the option of green, blue and orange.

Welded Mesh Fence is a welded wire that joined in a grid to form a parallel and longitudinal wires with constant space. It is also known as security fencing due to its few varieties provide more impact resistant and anti-theft abilities such as the Roll Top Fencing and the V Mesh Fencing. The smaller the space the higher the strength and the smallest space was also known as an Anti-Climb Fence. It is supplied in panel form for faster installation and easy joining.

Pegaso 3 Axis is our CNC Machine Center with moving portal. It is specially designed for milling, drilling, threading and cutting bars or workpieces made of aluminium, PVC, light alloys and steel. Its main structures are made of electro-welded steel, normalized and worked with CNC machine tools. It is movable in 3 Axis X, Y, and Z, controlled by high-precision brushless servomotors. Its tool magazine can hold up to 8 tools, placed on the back side of the moving portal. Clamp movement is automatically set and controlled by CNC. There are 3 standard versions of 4, 7 and 9 meters (double working area available for version 7 and 9 meters). It has a chips conveyor plate. Safety light curtains system is located in front of the machine. Safety guards are available in electro-welded net on the three sides of the machine.

Zeus 4 Axis is our CNC leading profile machining center developed to satisfy the most demanding production requirements across a broad range of industrial applications. The 4 axis include movement along X, Y, Z axis and also the rotational movement about X axis. This series is specially designed for drilling, milling and tapping operations on profiles made of aluminium, steel and light alloys. It is a robust structures made of electro-welded steel, tempered and worked with CNC machine tools. The 4-Axis movement is controlled by high-precision brushless servomotors. This series features a tilting head providing +/-90° of spindle tilt. Its tool magazine can hold up to 16 tools, placed on the back side of the moving portal. It has a milling cutter with 120mm diameter. Its clamp movement is automatically set and controlled by CNC (optional: Independent clamp positioning). It has 3 standard versions 4, 7 and 9 meters (Double working area for versions 7 and 9 meters). Chip conveyor plate is placed below the working area. Safety light curtains system is located in front of the machine.

Pegaso 5 Axis is our CNC Machine Center with moving portal. It is specially designed for milling, drilling, threading and cutting bars or workpieces made of aluminium, PVC, light alloys and steel. The 5 axis consists of X, Y, Z axis as well as rotational movement about X & Z axis. The main structure of Pegaso 5 Axis is electro-welded steel, normalized and worked with CNC machine tools. The 5-Axis movement is controlled by high-precision brushless servomotors. Tool magazine can hold up to 7 tools, placed on the back side of the moving portal (optional: 12 or 24 slots). Clamps movement is automatically set and controlled by CNC. It has 3 standard versions 4, 7 and 9 meters (With double working area for version 7 and 9 meters). Chip conveyor plate is placed below the working area. Safety light curtains system is located in front of the machine. Safety guards is available in electro-welded net on the three sides of the machine